Light gauge cut – to - length lines for metal steel, cut to length line, metal cut to length
Quick Detail:
- Thickness : 0.4-1.0mm
- Material : GI, PPGI, or Stainless steel, Aluminum
- Slitting strips: 5 strips/time
- Line speed : 12meter/min
- Material weight : 5Mt normally
- Coil inner diameter : 508mm
- Cutting tolerance : ±1mm
Brief Introduction:
Metal sheets or strips suppliers always need slitting and cut to length machine line for the production of metal sheets with different widths or lengths from GI, PPGI, or Stainless coils in large quantities.
There are many occasions narrow steel strips are necessary, for example, the production of stud and tracks, roof battens or angle steel bars is always made from narrow steel strips.
So, for the continuous production of the stud and tracks etc., after slitting, the re-coiler is necessary for the baby coil
Machine list:
- 5Tons hydraulic De-coiler
- Simple pre-leveling device
- Slitting device
- Guillotine device
- Simple driven re-coiler
- Siemens PLC and IOP/ touch screen, Schneider brand inverter
Description/Technical Parameter details of complete line:
- 5TX1250mm Hydraulic Un-Coiler with coil car
Hydraulic system to expand coil inner hole, Pump motor: 3KW
Coil Inner-diameter= 510±30mm
Load Capacity: Max. 5 Tons, Coil Width Max. 1250mm
Taper wedge expand type
Driving motor to turn the coil, 3KW
Delta brand inverter
- Simple pre-leveling device
- Slitting and guillotine details as below table :
| Suitable roll forming material | Color steel sheet or galvanized steel sheet |
| Thickness | 0.4mm-1.0mm |
| Coil input width | Max. 1250mm |
| Carriage Frame design | Wall-plate-frame-design, 18mm thickness |
| Slitting roller material | Cr12, heat treatment |
| Slitting strips | 4-5 strips/time |
| Slitting motor | 3Kw |
| Guillotine motor | 3Kw |
| Slitting speed | 15-20m/min |
| Electric Voltage Standard | 380V/50Hz/3PH or as the customer's requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or as per customer’s requirements |
- 5TX1250mm Hydraulic Un-Coiler with coil car
Coil Inner-diameter= 480mm
Load Capacity: Max. 1 Ton
Taper wedge expand type
Driving motor to re-coil the coil, 3KW
Delta brand inverter
Pneumatic cylinder on top to press the sheets
Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack Un-powered, 3 meter long
Profile Drawing/Layout/Equipment reference pictures:
Product Tags:
|
|
Professional Auxiliary Equipment Light Gauge Cut To Length Line For Metal Steel Images
|
